If you skipped the rub section, go ahead and rinse and pat dry the chicken with some paper towels.

Rub the outside of the chicken with some salt and black pepper (if you haven’t already rubbed it down with the optional run).

Allow the chicken to rest at room temperature for about 20 minutes while you prepare the grill and smoke pouch.

Light the grill and set it up for indirect cooking. This means that you are going to light only a portion of the burners. For a 3 burner set up, light the outside 2 burners on high and leave the middle burner off. For a 4 burner set up, light the outside 2…you get the point.

While the grill is heating up, create a smoke pouch according to these directions.

Place the smoke pouch over on of the burners on high. Close the lid to the grill and allow the smoke pouch to heat up and start smoldering.

While you are waiting for the grill to heat up, open a can of your favorite beer and drink HALF. For heaven’s sake, don’t pour it out and waste it. If you don’t like beer, have someone else drink it!

Now that we have our grill set up, a chicken that has warmed for 20 minutes on the counter and a smoldering smoke pouch, it’s time to stand that chicken up on the grill! I like to turn off the burners on the grill while I get the chicken situated. This is optional, but will probably make for a more comfortable experience.beer can chicken recipe

Using a pair of good tongs, grasp the chicken firmly. You can also stick your fingers in the neck portion of the chicken to get a good grip. Regardless of how you grab the chicken, make sure you can control it so we don’t drop it during the standing process. Now hold the chicken upright with the drumsticks facing down.

Here’s where this recipe gets it’s other name, beer butt chicken, slide your half of a beer up the chicken’s, um, bottom cavity.

While holding the chicken and the beer can, slide the chicken onto the grill and position the drumsticks out in front of the now standing chicken. The drumsticks and beer can should act as a tripod for your beer can chicken.

With your beer can chicken standing at attention, close the lid and you are done for at least an hour. We want to cook the chicken at around 300 degrees, so I suggest placing an oven thermometer right next to the chicken (making sure it isn’t over the lit side of the grill) to monitor the temperature. Tweak the two lit burners to maintain the proper temperature. Remember not to leave the lid open too long while checking the temperature. Each time you open the grill’s lid, you are letting out heat. Even better than opening the lid, place the thermometer so you can see it though one of the holes and then you don’t even need to disturb the lid.

After about an hour or an hour and 15 minutes, use a meat thermometer to check the temperature of the chicken. Once the breast meat reaches around 165 degrees, the chicken is done.

Carefully remove the chicken using a pair of tongs. Use caution when tipping the chicken over onto a platter because the can may have some more beer left.

Remove the beer can and let your chicken rest for around 10 minutes so that the juices can redistribute and then carve to serve!